mittronik - Generators, Infrared Heaters and Stage Lightingmittronik - Prime/Standby Power Generators for energy supply and infraredheaters for warming, electronics (e.g. Outdoor Notebook) and Stage Lighting
Generator for emergency supply in case of blackout / power failure

Standby Generators for emergency power supply Power generators for emergency power supply in case of mains failure / blackout

Emergency power supply: quite easy and safe. Make provisions !

MITTRONIK emergency power installations consisting out of a power generator and a UPS protect against power failures (blackouts).

  • Oil or gas based room heating are able to continue operation interruption-free.
  • Your PC is able to run interruption-free.
  • Refrigeratiors and upright freezers stay fully operational.
  • Door entry phones, doorbells and door-openers continue to stay in fuction.
  • Alarm systems do not fail.
  • Radios and TV sets can be used.
  • Lighting and outdoor ligthing stay in function.
  • Water pumps, dewatering pumps and pumping systems stay operational.
  • Household appliances can be supplied by emergency power.

MITTRONIK delivers suitable power generators with the necessary accessories for the power distribution of the house for each application.

Diesel standby generator set for emergency power supply in case of blackout - ENLARGEManual operated and automatic electrical cabinets for power distribution of houses can be delivered in each size. The necessary installation work can be done easily and for reasonable price by each electrician company.

Power generator with manual operated power switch

The power generator has to be started manually in a manual operated power distribution in case of a blackout. When the generator is in operation the grid has to be disconnected from the installation by tuning the main switch to the output of the power generator. This enables the power generator to distribute the installation of the building.

After returning of the power from the grid the main switch has to be returned to the grid position to disconnect the power generator. Then the power generator has to be stopped manually.

Automatic emergency power supply

A power generator with automatic emergency power option the above described steps are done automatically:

  1. The grid distribution is monitored. If one or several phases of the grid fail the standby power generator is started automatically.

  2. When the power generator is fully operational after a time of max. 10 seconds the grid is disconnected and the output of the generator is switeched to the installation of the house automatically.

  3. Returns the power of the grid and is stable the installation of the house is switched back to the grid automatically.

  4. Stays the grid stable for a period of 1 - 2 minutes the power generator is stopped automatically.

A manual or automatic operated emergency power supply can be done with 1 phase or with 3 phases. It is alos possible to combine it for the emergency power.

Hotline

+49(0)700-MITTRONIK

Reseller Area

Registration »

Notepad
show

0 Item

Copyright © 2010 MITTRONIK. All rights reserved. Power Generators. Imprint Print Page Top